Loading... Please wait...

Our Newsletter


PROXXON DRILL/GRINDER 12 VOLT 28500.

Price:
$68.00
SKU:
28500
Shipping:
Calculated at checkout
Quantity:
Bookmark and Share


Product Description

MICROMOT 50

 

 

 



28492-r1.gif
The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90.
28492-r2.gif
Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours.

 



 


Tested 100,000 times, these units speak for themselves.

Here's why:
The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12 V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

Milling/Drilling machine MICROMOT 50/E
The thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds. Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm are supplied. Power consumption is 40 W, max. length 220 mm and weight approx. 230 g.

NO 28 510

Milling/Drilling machine MICROMOT 50
As 60/E except without speed control is fitted. No load speed is 20,000 rpm.

NO 28 500

 


- For milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving and more.

- Useable on any workable material, e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc.

- Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians and more.

- 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones!

 


Product Videos

PROXXON MICROMOT 50 and 50E(02:11)
The diameter of only 35mm makes it easy to handle. The weight of 230g, quietness and effortless drive via the balanced motor with ground spindle and collar bearing all contribute to the ergonomic design. The high-quality MICROMOT steel collets ensure accurate clamping of the cutters, without thumping of bits and cutters. The size of the machine dictates a 12V drive system, use of a transformer is thus required. MICROMOT transformers of at least 1.0A are recommended.Clip made by st.one pictures:http://stonepictures.wordpress.com/

Add to Wish List

Click the button below to add the PROXXON DRILL/GRINDER 12 VOLT 28500. to your wish list.

You Recently Viewed...