Loading... Please wait...

Our Newsletter

Mandrel, Sandpaper, 1/8" Shank

Calculated at checkout
Bookmark and Share

Product Description


3/16" head diameter, 3/4" slot length, 1/32" slot width. 2-3/8" overall length. 20,000 RPM Max Speed.
Sandpaper or split mandrels have a "split" above the reinforced base allowing the user to wind sandpaper, polishing cloth, or other abrasives around the gap. These mandrels come in straight and tapered styles and are generally used to sand in tight spots. The straight version is good for finishing smooth surfaces while the tapered offers access to undercuts. 
Maximum and recommended speeds depend on the type and size of accessory, as well as the mandrel in use. The ratings we publish for our mandrels are based on an 1" overhang with an accessory that weighs under 1 gram, and is smaller than 1/2" in diameter. As a general rule, smaller accessories and mandrels can be used at higher speeds than larger accessories and mandrels. It is a good idea to follow the recommendations that come with both the accessory and the mandrel you are using. 


Loading Split Sandpaper Mandrels

Split Sandpaper Mandrels are used with cloth backed

paper that comes in various grits. Use the template to

cut pieces of the desired grit sandpaper. Slip the notched

end into the slot in the mandrel and tightly wind the

paper onto the mandrel with the grit side out. Then glue

the final edge of the roll with super glue. Use a double

twisted rubber band around the roll of paper to hold it

in place while the glue dries. It is important to use this

accessory at 12,000 rpm or lower for refined sanding

and smoothing


Find Similar Products by Category

Currency Converter

Choose a currency below to display product prices in the selected currency.

Australia Australia
New Zealand NZ

Add to Wish List

Click the button below to add the Mandrel, Sandpaper, 1/8" Shank to your wish list.

You Recently Viewed...