Contains the following accessories:
1 | Rotating Bur Holder, 1/4", 1/8" holes & cup |
1 | 3M Radial Bristle Disc, 3/4", 80 grit |
3 | Purple Ceramic Sanding Bands, 1/2" x 1/2", 60 grit |
3 | Purple Ceramic Sanding Bands, 1/2" x 1/2", 80 grit |
3 | Purple Ceramic Sanding Bands, 1/2" x 1/2", 120 grit |
3 | Purple Ceramic Sanding Bands, 1/2" x 1/2", 220 grit |
1 | Vanadium Steel Cutter, Knife Edge, 3/8" dia. x 9/16" long, 1/8" Shank |
1 | CeramCut Blue Stone Point, Round Top Taper, 1/8" dia. x 1/2" long with 3/32" Shank, 120 Grit |
1 | CeramCut Blue Stone Point, Flat Top Taper, 3/32" dia. x 3/8" long with 1/8" Shank, 120 Grit |
1 | CeramCut Blue Stone Point, Ball Nose, 1/8" dia. x 1/2" long with 1/8" Shank, 120 Grit |
1 | Typhoon, Cylinder, Coarse, Plain End, 9/16x3/4 |
1 | Typhoon, Cylinder, Fine, 5/16 x 1/2 |
1 | Typhoon Bur, Ball Nose, Coarse, Red, 3/32" Shank, 5/16" dia. x 1/2" long |
1 | Mandrel, Screw Type, 3/32" shank X 1/16" arbor screw |
1 | Mandrel. Split Type, Sandpaper, 1/8" shank |
1 | Plated Diamond Point, Ball, 4.3mm dia. x 3.8mm long, 2.35mm (3/32") Shank, 125-180 Micron (120-200 Grit) |
1 | Plated Diamond Point, Cylinder, 4.0mm dia. x 8.0mm long, 2.35mm (3/32") Shank, 125-180 Micron (120-200 Grit) |
1 | Rubber Sanding Drum Mandrel, 1/2" x 1/2", 1/8" Shank |
1 | V Series Point, 1/8" shank, Cylinder, 3/8 dia. X 3/8 h, 46/60 grit |
important:
1. we reserve the right to make substitutions when necessary,
2. Grase and pin and wrench shown in photo are NOT included