MICRO router MOF

Ideal for slotting, rounding over, counter boring and stock removal in wood, plastic, acrylic, MDF, URIOL, ceilings and many more. Powerful universal AC motor. Base housing of die-cast aluminium and face of smooth gliding synthetic material. Main housing of glass-fibre reinforced POLYAMIDE. With MICROMOT collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm). Parallel and circle jig and fitted with a dust collector.

Technical data:
220 - 240V. 130W. Footprint 70 x 100mm. Total height 180mm. Weight 1,400g. Insulated to class 2.

NO 28 568

MICROMOT steel collets
As described below. For all handheld MICROMOT machines, excluding the Engraver GG 12. One each 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm, clamping nut and holder for storage are included.

NO 28 940


Note:
MICROMOT steel collets are hardened and thus have a high, consistent flexibility. They also maintain prolonged accuracy, even after regular use (these collets should not be compared with unhardened, four-slit collets of brass and aluminium). The triple slit collet is substantially more difficult to manufacture than the four-slit type, but offers a better load- bearing surface. This is especially important for cutters with small shaft diameters.

	Lock button with scale for micro adjustment of depth in 0.2 mm increments and possibility to trench.
	Practical spindle lock button eases bit changing.
	Base of die-cast alu and face of smooth gliding POLYCARBONATE.
	Powerful universal motor with 27,500 rpm.
	Fitted with a vacuum cleaner or dust extractor adapter, for use in a dust-free environment. We recommend the use of our vacuum cleaner controller AS/E.
	Sturdy parallel and circle jig made of die-cast alu (with centring pin).

	Ideal for slotting, rounding over, counter boring, and stock removal in wood, plastic, Perspex, MDF, ceilings and many more. Supplied with six triple slit MICROMOT steel collets 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm and closure nut. Base and table made of die-cast alu. Upper part made of glassfibre reinforced POLYAMIDE. Technical Data: Runs at 27,500 rpm (no load). Mains voltage 220 - 240 V. 130 W max. Milling depth up to 20 mm. Footprint 70 x 100 mm. Height 170 mm. Weight 1400 g. Insulated to class 2. NO 28 568
	Wood Router Cutters Made of molybdenum-chrome vanadium steel. Used in the manufacture of picture frames, for sloting and various profiles. Inverse relief ground for cleaner cuts. All shafts 3.2 mm.   Slot cutter Diameter 3.2 mm NO 29 024         Slot cutter Diameter 5.0 mm NO 29 026         Slot cutter Diameter 6.5 mm NO 29 028         Rounding over cutter Diameter 6.4 mm NO 29 030         V-slot cutter Diameter 6.5 mm NO 29 032         Combi cutter 6.5/2.5 mm NO 29 034         Core box bit 3.2 mm radius NO 29 036         Rebating cutter 6.4 mm NO 29 038         Edge cutter with pin Diameter 5.0 mm NO 29 040         Half round cutter Diameter 13 mm NO 29 042                   Wood Router Cutter Set, 10 pieces A set with one each of the cutters, neatly arranged in a wooden box. NO 29 020             Note: These router cutters should only be used in machines or accessories such as the router MT 300, router base OFV or the router table FT 300. Free-hand use of these cutters is extremly dangerous!