Ideal for milling, drilling and more in hard to reach places, e.g. in model ships' hulls, as well as the cutting of small timber pieces. Special, balanced motor with maximum power output of 100 W, full wave electronic speed control.

3,000 - 15,000 rpm. 220 - 240 V. Stable head of die-cast aluminium; main housing made of fibreglass reinforced POLYAMIDE. Max. power input 100 W. Length 270 mm. Weight 550 g. Includes 6 collets covering 1.0 - 3.2 mm. Insulated to class 2.

Especially beneficial with the long neck angle milling/drilling unit WB 220/E. Due to its low overall height and narrow head, it can work in close radii, slots and internal areas and difficult to reach places.

Adapter
(internal thread M8 x 0.75)
3 Aluminium Oxide discs
(1 x 40 grit, 80 grit and 180 grit) for steel
3 Zircon Corundum discs
(1 x 50 grit, 80 grit and 120 grit) for stainless and alloy steel
3 Polishing Fleeces
(1 x coarse, fine and extra fine) for cleaning, finishing and removing annealing colours
(disc diameter 25 mm)

The adapter (with internal thread M8 x 0.75) fits the long neck angle milling/drilling unit WB 220/E, the professional drill/grinder IB/E and the precision drill/grinder FBS 240/E.

Ideal for a range of uses, where conventional devices and systems cannot be used because of their large-build. Better than self-adhesive systems, because the discs can be exchanged simply, thus can be changed constantly and used several times. Use it for sharpening, cleaning, deburring and polishing of all metal surfaces (steel, high-grade steel, alloyed steel and NE-metal).