With precise letter templates which are fixed in the guide rails provided. The workplace is aligned and fixed on the movable guide block using clamping jaws or a vice. Template contours can be precisely followed using the guide marker (ball handle).

The lettering to be milled is transferred scaled down. The transfer ratio can be set to 2:1, 3:1, 4:1 or 5:1 by simple adjustment of two screws. A maximum 14 of the letters supplied fit next to each other in the guide bar (template holder).

It is also equally easy to manufacture miniature, individual shapes, engravings, cutouts and outline shapes, even in series, using self-made templates or commercially available templates (plants, animals, coats of arms).

Two sets of letters from A to Z, full stop and hyphen (total 52 items), two sets of figures from 0 to 9 (20 items), fixing screws for the MF 70 base and an extensive instruction manual are included in delivery.

For working on steel, cast steel, non-ferrous metals, plastics, glass, stoneware and tiles. Nose angle 60° for high stability. Shaft diameter 3.2 mm. Not suitable for freehand work.

Scribing Stylus for forming thin lines and engraving fine-lined letters. Also for scribing printed circuit boards for later breaking-off.

NO 28 764

Engraving Stylus for v-shaped letters. Letter width at base 0.5 mm.

NO 28 765